15
2. INSTALLATION
2.2 Wall Mounting
Mount the bracket with the two
1
/
4
inch bolts in
the mounting kit.
Drill holes for the electrical conduits in the host
cabinet. Clean away any metal filings from inside
the host and around the holes.
Figure 2.2
Mounting the Bracket On the Host
Nuts are
mounted
inside the
host
equipment
4
5
STEP 2: Mount the UPS on the mounting bracket
Figure 2.3
Mounting the UPS on the Bracket
DANGER: Turn the battery breaker OFF.
The UPS supplies lethal power levels
without being hooked up to utility line power.
Unlock and open the enclosure. Disconnect
both the grounding wire and the nylon rope and
set the front aside.
Remove the two knockouts for the
5
/
16
inch bolts
at the top of the rear enclosure.
Mount the rear enclosure onto the bracket, with
the enclosure's bottom inside lip sliding into the
bracket's bottom and the enclosure's top flush
against the bracket's top.
1
2
3