33
3
OPERATION
3.6
Front Panel Indicators and Controls
The LEDs show what mode it is in and are used for troubleshooting. They automati-
cally change to show the UPS's status.
The Test, % Batt and % Load buttons are pressed to activate various functions.
Sections 3.6.1 to 3.6.8 describes how to operate the UPS with this panel.
PURPOSE: Describes how to operate the UPS with the
Display and Control Panel (Figure 3.4).
Figure 3.4
Display and Control Panel Layout
On Battery (50%) LED
Test Button
Test (100%) LED
On Line (25%)LED
Fault (110%) LED
% Batt. Button
% Load Button
Low Battery (75%) LED