Alpha Technologies
55
4
Communication
4.2
HyperTerminal Set Up (Continued)
11
In the
ASCII Setup
screen (Figure 4.2.7),
fill out the fields as shown.
12
Click
OK
. The
1800 TP Properties
screen
(Figure 4.2.6) reappears.
13
Click
OK
.
HyperTerminal setup is finished.
14
Press
ENTER
to go to the 1800 TP
screen (Figure 4.2.5).
Press
ENTER
again to access the unit via
RS–232 communications.
The
Main Menu
(Figure 4.2.8) appears.
Go to Secton 4.5, “Using the Main Menu”
for instructions on how to use it.
Figure 4.2.7
ASCII Setup Screen
Figure 4.2.8
Main Menu in 1800TP Screen
Novus 1800
[0-Main Menu]
1 Unit Specification
2 Input / Output Values
3 Maintenance
4 Line Slow Detection Setup
Line status: Normal
Output status: Line Mode
Faults:
Alarms:
