HIMOD_HP_MANUAL_vers0116_E
- 28 -
I
NSERTION
/
EXTRACTION PROCEDURE
The following operations can be performed only by skilled and specifically trained assistance staff.
When the MU is not inserted, uncovered parts with dangerous voltage are present on the corresponding
backplane.
The MU is preinstalled by the manufacturer. Remove the MU only in case of maintenance or replacement.
Strictly comply with the instructions below following the listed sequence.
EXTRACTION
Unscrew the two side fastening knobs.
Using the knobs, carefully pull and remove the MU.
INSERTION
Carefully insert the MU in the dedicated slot.
Fasten the MU by tightening the side knobs.