ALPHA WORKS GUR052, Operator'S Manual

4

CHECKLIST BEFORE USING THE DEVICE

1. In order to power up the sockets, first click each button, and check whether the indicator 

lights are working.

2. Your smart phone or tablet should have connected a 2.4G WIFI with internet.

3. The device only supports 2.4G network. Please don’t connect to a 5G network or hybrid 

network.

4. Enter correct WIFI passwords. Make sure that your WIFI SSID and passwords don’t contain 

special characters.

5. During pairing process, make sure that your IOS or Android device and smart socket within 

the range of the router.

6. Please pay attention to the maximum power that this socket.

Retract the cord

1. Principal control: Press button 2 on the body and the cord can retracts. (pictured below)

2. Socket control:

2.1.

2.2.  Press any of the 3 socket buttons to control the current flow of each socket.

The indicator lights are green 
while working, and the RF 
indicator will flash.

RF Button

Socket

Socket 
Button 3

Button 1 

Socket

Button 2

2

1

Press both the RF button the cord can retracts

.（

If the cord can't retracts

，

need to 

reconnect RF,Press the main body buttons 2 for more than 4 seconds

, Then 

press 

any button at the socket end

,

When the light flashes, the connection is successful

.

(pictured below)