Compiled and designed by Publications 2000, Tel (01670) 356525
These guidelines have been carefully prepared but we reserve the right to
alter the specification at any time in the interest of product improvement.
© Alpha Therm Limited 1999.
07/99/D117
f.
Engage Duct 'B' into the flue extension as shown in Fig. 14. Duct B goes inside Duct A and Duct C goes over Duct D.
Note:
If there is any difficulty in locating the ducts together, ensure that all engaging ducts have no burrs and are not
distorted.
g.
When the telescopic section of the flue has been adjusted to the correct length, seal and secure the joint with the
sealing tape supplied. See Fig. 15.
Important Note:
Ensure that the inner duct is connected securely throughout the flue assembly.
Fig. 14
Fig. 15
h.
Continue to fit the complete assembly to the boiler as described in section2, paragraphs f to i.
Part No. 0001126
Alpha Therm Limited.
Nepicar House, London Road, Wrotham Heath
Sevenoaks, Kent TN15 7RS
email: info@alphatherm.co.uk
website: www.alpha-innovation.co.uk
