14
C048-781-30 R01, Rev. B (01/2020)
5.1.2.2
5.1.2.2 Menu Icons
Menu Icons
Table 9. Menu Icon Key
ICON
FUNCTION
BREAKER INVENTORY
- Prompts user to take breaker inventory when icon is pressed
SETTINGS
- Bus Calibration
┣
Bus Load
┗
Bus Voltage
- System
┣
Display
┣
Touch Calibration
┣
Settings
┗
Information
- Advanced
┣
Raw Data
┣
Configuration
┣
Test Modes
┗
Restore Defaults
RETURN
- Returns to previous screen when icon is pressed
HOME
- Returns to home screen when icon is pressed
5.2
5.2 Home Screen
Home Screen
5.2.1
5.2.1 Bus Load and Voltage Displayed Per Bus
Bus Load and Voltage Displayed Per Bus
Table 10. Bus Status Monitored
BUS STATUS
COLOR
STATUS
Green
Normal operation
Orange
Bus in minor alarm (bus overload warning)
Red
Bus in major alarm (bus overload and/or high or
low voltage)
5.2.2
5.2.2 Display Per Breaker Status
Display Per Breaker Status
Asterisks indicate that each channel has redundancy enabled (default).
Table 11. Display Per Breaker Status
BREAKER
STATUS COLOR
STATUS
Gray
Breaker not installed and if installed, breaker is
OFF and not inventoried
Green
Normal operation and breaker is in inventory
Light Orange
Breaker not inventoried but turned ON (no
alarms monitored)
Orange
Breaker in minor alarm and only monitored for
inventoried breakers (breaker overload warning)
Red
Breaker in major alarm and only monitored
for inventoried breakers (breaker overload or
breaker trip)
Bus status
(background color)
Total bus
current
Bus voltage
Breaker
label
Redundancy
ON/OFF
Figure 13. Bus Status
Alarm icon
Breaker
status
Figure 14. Breaker Status
