17
IMPORTANT: FIRST FIRES
Use smaller and shorter ‘gentle’ fires
the first five or six times that you fire up
the stove, making these progressively
bigger, as this will avoid any potential
thermal shock and allow the cast iron
components to ‘acclimatise’ with each
other. Allow the stove to fully cool
down between these fires.
When first using the stove it is normal
to experience paint fumes or see light
smoke rising from some of the stove’s
painted surfaces. During this stage
ensure that the room has additional
ventilation by opening doors and
windows to minimise any adverse
effects.
The hotter you burn the stove the more
intense these fumes will be, which is
one of the reasons that we advise that
you use smaller fires to start with. Every
time the stove reaches a new higher
temperature it may still be possible to
smell these fumes or see some
gentle smoke until the paint work is
fully cured.
If smoke and fumes persist do not use
the stove and immediately consult your
installer, as this may indicate that there
could be a possible problem with the
installation.
UNDERSTANDING HOW
DIFFERENT FUELS BURN
Wood and solid fuels (multi fuels) burn
in different ways and you will need to
understand these differences if you
want to get the best out of operating
your stove.
Basically solid fuels need a flow of
combustion air through the bottom
grate whereas wood does not require
this as its combustion air can be taken
from above the grate. Wood always
burns best on a bed of its own embers
and shouldn’t need to be riddled. On
the other hand, solid fuel requires
riddling to maintain an adequate air
flow from underneath the grate.
Your new stove can burn very well, or
very poorly, depending on how you
light the fire, how you refuel the fire,
and, of course, the type and quality of
the fuel that you are burning. A flue
temperature gauge and log moisture
meter are both cost-effective invest-
ments and are highly recommended if
you want to maximise the efficiency of
your stove and fuel.
Wear protective gloves when loading a
burning stove and place logs and other
fuels precisely where you want them by
using heat-resistant tongs. Always open
the stove door gently to avoid
unnecessary air turbulence which could
cause ash or small lighted embers to
be drawn from the fire chamber and
beyond the protective hearth. Never
operate the stove without the fire fence
(or log guard) in position.
The stove is not designed to be
operated with the door open.
