20
Alpha SolarSmart 100 - Commissioning
5.5 USER INFORMATION
The User must be advised (and demonstrated if necessary) of the following important points:-
1. How to turn the SolarSmart system on and off. It is recommended the system is always left on.
2. Explain what information is shown on the display and in the unusual case of a fault occurring, explain the fault codes
that may be shown (see Section 10).
3. Show the User the position of the tundish discharge pipes
4. How important it is for the combination boiler hot water thermostat to be left at the maximum position (No. 9) and that it
is the purpose of the label (Fig. 18) to maintain this and that the label must not be removed.
5. Weekly cleaning of shower heads and emptying shower hoses after use.
6. To avoid scalding; if thermostatic blending valves are not fitted, take due care and attention, especially with children and
older people, when running a bath.
7. Ensure the Checklist at the back of these instructions has been completed after the unit has been installed and
commissioned.
8.
Leave these instructions with the User for use on future calls and for recording details in the Service Record at the back of
these instructions.
Fig. 24
Fig. 25
S
1
S
2
3
S
S
1
3
S
