1.) Take the landing skid and place it
into the support frame. Make sure the
screw hole on the landing skid lines up
with the hole in the frame.
2.) Firmly screw in the landing skid to
the frame with a screwdriver.
3.) Repeat steps 1 and 2 for the other
landing skid.
1.) Locate the 4 connection pillars on
the bottom of the drone.
2.) Place the camera assembly on top
of the connection pillars so the screw
holes line up.
3.) Firmly secure the camera assembly
to the frame with the included 4 screws
and screwdriver.
4.) Attach the camera cable to the
drone.
1.) Turn on the cover lock on the
battery cover.
2.) Remove the battery cover by
sliding it off.
3.) Place the battery pack into
the battery bay. Connect the
battery cable to the drone.
4.) Replace the battery cover
and lock it with the cover lock.
Battery Cover
Cover Lock
LANDING SKIDS INSTALLATION
CAMERA INSTALLATION
DRONE BATTERY INSTALLATION
