DNS And Advanced Settings:
These Options may be used on all WAN Modes:
?
If you have the DNS servers provided to you by the ISP, please select
the
Use these DNS Servers
?
Please enter the
Primary DNS Server
provided by your ISP
?
Please enter the
Secondary DNS Server
provided by your ISP
?
Use the Default MTU
is enabled by default
?
MTU
(Maximum Transmission Unit) determines The largest packet size
(in bytes) that the router will send to the WAN. The MTU must be set to
match the MTU settings of your ISP connection. If the router's MTU is
set too high or low network performance can suffer. For an Ethernet
connection, values are 1500 bytes and 1492 bytes for a PPPoE
connection. The Router will use the default value assigned in the
MTU
window.
?
WAN Port Speed
is set to Auto by default. You can select the connection type (10 or 100Mbps) if you have trouble connecting the WAN
port.
?
Respond to WAN Ping
is disabled by default. The Router will not respond to requests from a ping command received via the Internet.
Hackers commonly Use WAN Ping IP addresses to test whether your WAN IP address is valid.
?
MAC Cloning Enabled.
When this box is checked, The
MAC address
does not need to be entered manually in the next window. The
WAN port will use the MAC Address of the network adapter in the computer that you are using to access the router.
Version 1.0
Page 27
Alpha
Secure Wireless Router 8800
GIGABIT
Summary of Contents for Gigabit 8800
Page 1: ...Us er M an ua l...