Investigate the layout of your vehicle thoroughly before
drilling or cutting. Take care when you work near the gas tank,
gas lines, hydraulic lines, electrical components and electrical
wiring. Do not use the equipment unmounted. Attach this sys-
tem securely to prevent damage, particularly in the event of an
accident or aggressive driving. Do not mount the system so that
wire connections are unprotected or are subjected to pinching
or damage from nearby objects. Before connecting or discon-
necting power connections at the system power terminals, dis-
connect the +12V DC wire at the battery end. Confirm that your
source unit and other equipment are turned off while connecting
the input terminals. If you need to replace the power fuse, re-
place it only with a fuse identical to the provided fuse. Using a
fuse of different type or rating may result in damage to the sys-
tem, which is not covered by the manufacturer’s warranty. Do
not install any product where it may be subjected to excessive
heat, moisture and dust or where it may be repeatedly kicked,
brushed or bumped. Make absolutely sure that the terminals
for the products are connected to the proper inputs and outputs
from the music source. Never run the wiring on the outside of
the vehicle or under it where it can be damaged by road hazards
or any moving parts of the vehicle. Use existing wire channels,
sills, panels and molding strips inside the vehicle to hide the wir-
ing for safety and a neat appearance.
DISCLAIMER
IMPORTANT: Never cut any metal that is an integral part
of the vehicle’s safety or structural support system. If you are
unsure, it is best to have the product professionally installed by
an Authorized Alphasonik Dealer. Never sacrifice your safety for
sound.
W
A
R
N
I
N
G
A
N
D
D
I
S
C
L
A
I
M
E
R
16
