Alphasonik AS26, Manual

W

ARNING & DISCLAIMER

Investigate the layout of your vehicle thoroughly before drilling 

or cutting.  Take care when you work near the gas tank, gas lines, 

hydraulic lines, electrical components and electrical wiring.  Do not 

use the equipment unmounted.   Attach this system securely to prevent 

damage, particularly in the event of an accident or aggressive driving.  

Do not mount the system so that wire connections are unprotected or 

are subjected to pinching or damage from nearby objects.  Before 

connecting or disconnecting power connections at the system power 

terminals, disconnect the +12V DC wire at the battery end.  Confirm 

that your source unit and other equipment are turned off while 

connecting the input terminals.  If you need to replace the power fuse, 

replace it only with a fuse identical to the provided fuse.  Using a fuse 

of different type or rating may result in damage to the system, which is 

not covered by the manufacturer’s warranty.  Do not install any 

product where it may be subjected to excessive heat, moisture and 

dust or where it may be repeatedly kicked, brushed or bumped.  Make 

absolutely sure that the terminals for the products are connected to the 

proper inputs and outputs from the music source.  Never run the 

wiring on the outside of the vehicle or under it where it can be damaged 

by road hazards or any moving parts of the vehicle.  Use existing wire 

channels, sills, panels and molding strips inside the vehicle to hide the 

wiring for safety and a neat appearance.  

DISCLAIMER

IMPORTANT:  Never cut any metal that is an integral part of 

the vehicle’s safety or structural support system.  If you are unsure, it 

is best to have the product professionally installed by an Authorized 

Alphasonik Dealer.  Never sacrifice your safety for sound.

11