C
H
O
O
S
I
N
G
A
L
O
C
A
T
I
O
N
5
It is always best to plan the complete installation prior to
attempting to install any product. The routing of wires, power
connections and mounting locations should be planned first. As
with any car stereo installation, all work performed should be
checked thoroughly and carefully prior to the operation of the
system.
The placement of your Alphasonik speakers within your
vehicle will greatly affect the overall performance of your audio
system. Installation in every vehicle may not be possible
without modifications. Factory provided locations are generally
preferable due to ease of installation. In all cases speakers
should be placed in a location free of obstruction by body
panels, window cranks, storage compartments or anything that
may hinder the speaker's performance. Avoid areas that do not
provide a flat, sturdy mounting surface.
Alphasonik speakers are designed to fit in almost any
factory location. Again, if at all possible, it is recommended that
you use a factory location. This applies mostly to later model
vehicles. For those earlier models that do not have factory
locations or are limited to front locations, it is recommended that
you choose an area with sufficient air space.
If you allow an insufficient amount of air space, the
speaker may not reproduce low frequencies very well. It is
recommended to mount the speakers in door panels, kick
panels, rear decks, etc. Ideally, the speaker should be mounted
where it will be in an enclosed airspace, allowing for extended
bass response.
