- -
3
By pressing of yellow button remove the SIM card keeper.
Insert the SIM card and replace the SIM card keeper.
Before
inserting the SIM card we recommend checking at
various mobile phone state of the SIM card (starting with
or without PIN, PIN, etc.) and set starting without PIN.
When you want starting with PIN you have to
preprogrammed this PIN and set starting with PIN (via
table of
programming).Without this setting the Gate wont
work
. DO NOT FORGET ANTENNA CONNECTION. The
Gate fix on the wall by 2 holes on the back cover. The
available place choose up following point of view:
1. distance from PBX
– possibility of GSM interferences to
other PBX lines as same as lenght of line from Gate to
PBX (max. 200m)
2. main 230 V for power supply of Gate
3. Quality of GSM signal at the installation place of GSM
Gate
Quality of GSM signal
The sound quality depends on BTS setting where you are
connected by the Gate. To find best place for antenna
mounting you can use either mobile phone or feature 29 (table
of programming). The suitable signal power is 3 scales of
mobile graduation.
Connection of antenna
When you connect magnetic antenna keep on mounting at
bigger iron subject. This subject makes „against-weight“ at its
depends the power of radiated signal.
