9
3. To keep the heater clean, the outer shell maybe cleaned
with a soft, damp cloth. You may use a mild detergent if
necessary. After cleaning, dry the unit with a soft cloth.
(CAUTION: DO NOT let liquids enter the heater).
4. DO NOT use alcohol, gasoline, abrasive powders,
furniture polish or rough brushes to clean the heater. This
may cause damage or deterioration to the surface of the
heater.
5. DO NOT immerse the heater in water
6. Wait until the heater is completely dry before use.
Storage: Store the heater in a cool, dry location when not in use
to prevent dust and dirt build up. Use packaging carton to store.
ATTENTION:
1. Always disconnect the heater from the electricity supply and
allow it to cool before attempting to work on it.
2. If the heater has collected dust or dirt inside the unit or around
the heating element, have to unit cleaned by a qualified
service agent. Do not operate the heater in this condition.
3. The only maintenance required is cleaning of the external
surfaces of the heater.
4. Do not touch the heating element with bare fingers, as residue
from your hand could affect the life of the lamp. If it is
accidentally touched, remove the finger marks with a soft cloth
moistened with mentholated spirit or alcohol.
5. Do not attempt to repair or adjust any electrical or mechanical
functions on this heater.
6. The heater contains no user serviceable parts. Should the
product suffer damage or breakdown, it must be returned to
the manufacturer or its service agent.
7. Damaged supply cords to be replaced by the manufacturer,
service agent or similarly qualified person in order to avoid
hazard.
