Alpine CDE-9801R, Owner'S Manual

14

-EN

-

 / 

J

SOURCE/

POWER

Preset buttons

4 

Normal Play and Pause

1

Insert a CD. The CD player begins playback from
the first track on the disc.

The display shows the track number. When the
last track is played back the player returns to
the first track.

2

If a disc is already loaded in the CD player, press
the 

SOURCE/POWER

 button to select the CD

mode.

3

Press the 

-

/

J

 button to temporarily stop CD

playback.
To resume playback, press the 

-

/

J

 button

again.

Music Sensor (Skip)

1

Momentarily press the 

g

 button once during

CD play to return to the beginning of the current
track. If you wish to access a track further back,
repeatedly press until you reach the desired
track.

Press the 

f

 button once to advance to the

beginning of the next track. If you wish to access
a track further ahead, press repeatedly until the
desired track is reached.

NOTE

The music sensor feature is functional in the play or
pause mode.

Fast Forward and Backward

1

Press and hold the 

g

 or 

f

 button to quickly

move backward or forward until you reach the
desired section of the track.

Repeat Play

1

Press the 

4 ( 

 )

 button to play back

repeatedly the track being played.
The RPT indicator appears and the track will be
played repeatedly.

Press the 

4 ( 

 )

 button again to deactivate

the repeat play.

NOTES

•

If a CD Changer is connected and the RPT ALL
mode is selected, the unit repeatedly plays back all
tracks on the disc selected (CDM-9807RB/CDM-
9805R/CDM-9803RM/CDM-9803R only).

•

In case a 6-disc CD changer is connected (CDM-
9807RB/CDM-9805R/CDM-9803RM/CDM-9803R
only):
Press the F/SETUP button so that the "FUNC"
indicator lights up, then go to step 1.
Press the F/SETUP button to return to the normal
mode.
The "FUNC" indicator light goes out.

g

f

CD Player Operations

5 

6 

RPT

 RPT ALL

 (OFF)

→

→

→