6
-EN
01GB04CDE9870.fm
ALPINE CDE-9870 68-05946Z88-A (EN)
.
Accessory List
•
Head unit ............................................................................1
•
Power cable ........................................................................1
•
Mounting sleeve.................................................................1
•
Carrying case .....................................................................1
•
Bracket key.........................................................................2
•
Screw (M5 × 8)....................................................................4
•
Owner’s Manual .......................................................... 1 set
Turning Power On and Off
Press
SOURCE/
to turn on the unit.
•
The unit can be turned on by pressing any other button except TITLE,
and
(Release).
Press and hold
SOURCE/
for at least 2 seconds to
turn off the unit.
•
The first time power is turned on, the volume will start from level 12.
Detaching and Attaching the Front Panel
Detaching
1
Turn off the unit power.
2
Press
(Release)
at the lower left side until the
front panel pops out.
3
Grasp the left side of the front panel and pull it out.
•
The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
•
To protect the front panel, place it in the supplied carrying case.
•
When detaching the front panel, do not apply excessive force as it
may result in malfunction.
Attaching
1
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
2
Push the left side of the front panel until it locks
firmly into the main unit.
•
Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
•
Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Remove the detachable front panel.
3
Press
RESET
with a ballpoint pen or similar pointed
object.
Adjusting Volume
Press
or
until the desired sound is obtained.
Pressing and holding
or
will change the volume level
continuously.
Getting Started
SOURCE/
AUDIO/
RTN
/
/ENT
MUTE/SETUP
1
RESET switch
(Release)
01GB00CDE9870.book Page 6 Wednesday, October 11, 2006 7:27 PM
Summary of Contents for CDE-9870
