Settings
49
6.6 Configuring network function settings
You can activate or deactivate network function and driving impact notification.
6.6.1 Setting the network function
Follow the instructions to turn on or off the network function.
1
From the mobile viewer, tap
Dash Cam Settings
>
Network Function Settings
.
2
From
Network Function
, select
Enabled
or
Disabled
. The new setting is applied automatically.
6.6.2 Setting sensitivity for driving impact notification
You can set the detection sensitivity to notify you if an impact is detected while driving. Follow the
instructions to select a sensitivity for the driving impact notification.
1
From the mobile viewer, tap
Dash Cam Settings
>
Network Function Settings
.
2
From
Driving Impact Notification
, select the desired sensitivity. The new setting is applied
automatically.
1G: An acceleration of 1G equates to a rate of change in velocity of approximately 35 kilometers per hour (22
mph) for each second that elapses.
•
Impact 1 = 3G
•
Impact 2 = 4G
6.6.3 Setting driving impact video upload
You can choose to upload driving impact videos to the cloud server if an impact is detected while driving.
Follow the instructions to enable or disable this feature.
1
From the mobile viewer, tap
Dash Cam Settings
>
Network Function Settings
.
2
From
Upload Driving Impact Video
, select
Enabled
or
Disabled
. The new setting is applied
automatically.