15
-EN
Turning the System On
With the Alpine system, when the ignition key is turned to ACC or ON,
the opening screen will be automatically displayed.
When the system is used for the first time, the language
selection menu is displayed. Swipe the Language list screen
vertically, then touch your choice from the list of 23 languages.
For i902D/iLX-702D:
After selecting the language, the time setting screen is displayed.
Touch [ ] or [ ] of “Hour”, “Minute” to adjust the time, then
touch
[OK]
to confirm.
Touch
[Reset]
to reset the time.
• For i902D/iLX-702D, the GPS antenna should be connected before
adjusting the time.
• Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake before attempting these operations.
Initial System Start-Up
Be sure to press the
RESET
switch when using the unit for the first time,
after changing the car battery, etc.
1
Turn off the unit power.
2
Press the
RESET
switch with a ballpoint pen or similar
pointed object.
For X902D/i902D
For X802D-U/INE-W710D/iLX-702D
Adjusting the Volume
Adjust the volume by pressing
/
or
/
.
Volume decreases/increases continuously by pressing and holding
/
or
/
.
Volume: 0 - 35
Lowering Volume Quickly
Audio Mute function instantly lowers the volume level to 0.
1
Press the
(MUTE)
button to activate the MUTE mode.
The audio level will be 0.
2
Pressing the
(MUTE)
button again will bring the
audio back to its previous level.
Touch Screen Operation
You can operate the system by using the touch panel on the screen.
• Be sure to touch the onscreen button lightly with the pad of your finger
to avoid scratching the display.
Touch operation
Touch a button or list item on the screen lightly.
• If you touch a button and there is no reaction, remove your finger.
• Onscreen buttons that cannot be operated are dimmed.
Swipe operation
Move your finger lightly with a swipe.
Drag & Drop operation
Touch and hold the desired item, then drag it to its new location by
moving your finger, then release your finger to place the item.
• It is not possible to narrow the screen with two fingers (pinch in) or
spread the screen (pinch out).
RESET switch
RESET switch
Summary of Contents for i902D
Page 97: ......
