67
-EN
Playing a Disc
1
Press the
(AUDIO)
button to select DVD (CD) mode.
The display shows the DVD (CD) mode screen.
When a disc is inserted into the disc slot of the DVD Player, with
the label side facing up, the unit starts playback of the disc.
• The reverse side of a double-sided DVD will not be played
automatically.
Remove the disc, turn it over, and reinsert it.
• DO NOT insert discs containing maps for the navigation system. Doing
so could result in damage.
• For your safety, video is not displayed and only audio can be heard
while driving.
On DVD mode, menu screens may appear automatically. If this
happens, perform the operation described below to start playback.
Direct Menu Operations
1
Touch the screen while the DVD menu is being
displayed.
Directly touch operation switches displayed on the screen to
operate.
• To display the operation screen, touch [Control].
2
Touch the DVD menu directly.
• Some operations cannot be performed depending on the disc.
Menu Operations
1
Touch
[
] (Menu Control)
.
The menu operation mode will be displayed.
• You cannot operate them while driving.
2
Touch
[Key]
.
The Key panel is displayed.
Touch [Return] to return to the previous display.
3
Select a desired menu item by touching
[
]
,
[
]
,
[ ]
or
[ ]
.
• Touch
[
]
or
[
]
to change the Key panel location from right to
left or vice-versa.
• Touching
[
]
in the operation panel returns to the screen in step
1.
• Touching
[Key]
displays the numeric keypad input mode screen.
For details of the numeric keypad input mode screen, see
“Numeric Keypad Input Operations” (page 68).
4
Touch
[Enter]
to confirm the selected item.
WARNING
It is dangerous for the driver to watch the DVD while
driving the vehicle. The driver may be distracted from
looking ahead and an accident could occur.
Install the unit correctly so that the driver cannot watch
DVD unless the vehicle is stopped and the emergency
brake is applied.
If the unit is not installed correctly, the driver will be able
to watch DVDs while driving the vehicle and may be
distracted and could cause an accident. The driver or
other people could be severely injured.
CAUTION
• Not all functions will operate for every DVD. See the
individual DVD’s instructions for details on the features
supported.
• Fingerprints on a disc may adversely affect playback. If
a problem occurs, remove the disc and check for
fingerprints on the playback side. Clean the disc if
necessary.
• If you switch the power or Ignition key OFF or change
sources during playback, playback will continue where
you left off when you resume playback.
• If you try to perform an invalid operation (based on the
type of disc being played), the following mark is
displayed on the monitor screen:
• Play Position Memory Function
Even if you turn power off or switch the Ignition key to
OFF during playback or change the source, playback
will continue from the point where playback stopped
when the power is turned ON again.
If a Menu Screen Appears
Summary of Contents for i902D
Page 97: ......
