69
-EN
This operation can be performed only when the gear lever is in the
reverse position (R).
Make sure view change function is set to ON (page 48).
1
Touch any area of the screen to display the view
change function keys.
2
Touch
[Back]
for three times.
The volume adjustment screen appears.
3
Touch
[Panorama]
to switch a desired Volume
Level.
Touching the button toggles the volume level.
4
Touch
[
]
to return to normal mode.
This operation can be performed only when the gear lever is in the
reverse position (R).
Make sure view change function is set to ON (page 48).
1
Touch any area of the screen to display the view
change function keys.
2
Touch
[Back]
for three times.
The volume adjustment screen appears.
3
Touch
[Back]
again.
The sensitivity adjustment screen appears.
4
Touch
[Panorama]
to switch a desired detection
sensitivity level.
Touching the button toggles the volume level.
5
Touch
[
]
to return to normal mode.
Adjusting Alarm Volume (HCE-C300R only)
Adjusting Detection Sensitivity
(HCE-C300R only)
Display example for volume adjustment screen
Low:
Detects mainly moving objects.
Almost no motionless objects are detected.
High:
Detects moving objects and motionless objects.
Display example for sensitivity adjustment screen