12
-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
Moving the Monitor to be Flat
When you want to operate some function on the car (air conditioner,
etc.) which is hidden by the raised monitor, use this function.
1
When the monitor is open, press
OPEN (FLAT)
.
The monitor moves to the flat position.
2
Press
OPEN (FLAT)
again.
The monitor returns to the previous angle.
•
The monitor returns to the previous angle 10 seconds after being
moved to the flat position.
•
If an excessive force is added to the monitor when the monitor is flat,
putting an object on the back of the monitor for example, it may
cause a malfunction.
Adjusting the Volume
Adjust the volume by turning the
Rotary encoder
.
Volume: 0 - 35
Lowering Volume Quickly
Activating this function will instantly lower the volume level by 20 dB.
Press
MUTE (Rotary encoder)
to activate the MUTE
mode.
The audio level decreases by about 20 dB.
Pressing
MUTE (Rotary encoder)
again brings the audio back to
its previous level.
How to view the Display
The display unit is equipped with onscreen, tactile feedback
(PULSETOUCH™).
•
To protect the display, touch the onscreen button with the tip of your
finger.
•
If you touch a button and there is no reaction, remove your finger
from the display once, and try again.
•
If you touch two buttons at the same time, a malfunction may occur.
Here is an example explanation for the Radio mode display on how to
recall a source.
1
Press
SOURCE/
.
The SOURCE selection screen is displayed.
Display example for SOURCE selection screen
Displays source modes that can be selected.
Changes to the Rear Selection screen when “Setting the
Picture/Sound Output” (page 38) is set to ON.
Returns to the previous screen.
•
The kind of source modes that are displayed varies depending on
connection and setting.
•
When the source icon is not displayed on SOURCE Selection screen,
it is displayed on the next page.
Touching
[
NEXT
]
on the SOURCE Selection Screen will display the
next page; touching
[
PREV.
]
will return to the previous page.
PULSETOUCH™ operation
What is the tactile feedback (PULSETOUCH™) ?
When you touch a button graphic in the display, you will feel a
mild vibration and click on the display panel surface. This
feedback enables you to easily identify action areas in the
display.
Onscreen buttons are expressed as follows in this Owner’s
Manual.
•
Onscreen buttons are shown in bold, enclosed in [ ] (e.g.
[BAND]
).
Recalling the Source
+01GB00IVAD105.book Page 12 Monday, January 15, 2007 4:02 AM
Summary of Contents for IVA D105 - DVD Player With LCD Monitor
Page 2: ......
