27
-EN
01GB05IVA106E.fm
ALPINE IVA-D106E 68-12118Z27-A (EN)
Blackout Mode On and Off
When Blackout mode is turned on, the display will turn off to reduce
power consumption.
This additional power enhances the sound quality.
1
Touch
[VISUAL]
on the main source screen.
The VISUAL selection screen is displayed.
2
Touch
[OFF]
.
The backlit-display portion goes out.
3
Touch
[OFF]
again to cancel the display backlight.
•
To apply the setting, set to VISUAL in “Setting the VISUAL Button”
(page 34).
•
If any button on the unit is pressed during Blackout mode, the
function will be displayed for 5 seconds to show the operation before
returning to Blackout mode.
Setting rear Camera Interruption
When the rear camera is connected, rear pictures are output on the
screen.
1
Select ON in “Setting the Rear Camera Input”
(page 33).
2
Touch
[VISUAL]
on the main source screen.
The VISUAL selection screen is displayed.
3
Touch
[CAMERA]
.
Rear picture is output even if you do not engage the shift
lever in reverse (R).
4
To cancel the setting, press
VISUAL
on the unit,
and touch
[NORMAL]
.
•
By shifting to reverse (R), the rear pictures are output. This function
is effective when the reverse wire is properly connected.
DVD Setup Operation
The DVD Setup operation can be carried out after removing the
disc from the unit.
1
Touch
[SETUP]
on the main source screen.
The SETUP selection screen is displayed.
2
Touch
[
]
of SOURCE SETUP.
The SOURCE SETUP screen appears.
3
Touch
[
]
of DVD SETUP.
The DVD setup screen appears.
4
Touch
[
]
or
[
]
, etc. of the desired item to change
its setting.
Setting items:
MENU LANGUAGE / AUDIO LANGUAGE / SUBT. LANGUAGE /
COUNTRY CODE / PARENTAL / DIGITAL OUT MODE /
DOWNMIX MODE / TV SCREEN / BONUS CODE /
DVD-A SETUP / DVD PLAY MODE / FILE PLAY MODE /
DivX INFO. / PBC
Display example for DVD setup screen
Touch
[CODE]
to display the numeric keypad screen.
Touch
[
]
or
[
]
to set a desired language/item.
Scrolls the page list up or down.
Scrolls the list item by item.
Touching and holding will scroll continuously.
Setup
DVD Setup
The Parking Brake must be engaged to access the DVD mode
screen. Attempting to access this screen while driving will display
the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 5 are common operations to each
“Setting item” of DVD Setup. Refer to each section for details.
01GB00IVAD106E.book Page 27 Tuesday, January 15, 2008 2:48 PM
