72
-EN
01GB07IVA106E.fm
ALPINE IVA-D106E 68-12118Z27-A (EN)
When Connecting External Equipment
EQ/DIV
NORM
To Audio Input terminal
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place the two switches in the EQ/DIV position.
When no device is connected, leave the switch in the
NORM position.
Change both switches to the left to set to the NORM
position.
Change both switches to the right to set to the EQ/DIV
position.
(If the front panel is viewed from the front.)
•
Do not make the two switches to different settings.
•
Be sure to turn the power off to the unit before changing the
switch position.
Video/Audio Output Connectors (AUX OUTPUT)
Use when connecting an optional monitor etc.
iPod (V)/CAMERA Connector
Use when connecting a back-up camera.
Audio Input Connectors (AUX/CAMERA IN)
Monitor Control Lead (White/Pink)
Connect this to the Monitor Control Lead of the touch panel-
compatible rear monitor.
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect to
the plus side of the car's reverse lamp. This lamp illuminates
when the transmission is shifted into reverse (R).
With this lead properly wired, the video picture
automatically switches to the back-up camera whenever the
car is put into reverse (R).
RCA Extension Cable (Sold separately)
To Video Input terminal
To Video Output terminal
To Video Output terminal
To Audio Output terminal
Rear monitor
(Sold Separately)
Back-up camera
(Sold Separately)
TV Tuner or VCR
(Sold Separately)
(White/Pink)
M.CONT
M.CONT
(White/Pink)
(White/Brown)
REMOTE OUT
REMOTE IN
(White/Brown)
(White/Brown)
REMOTE IN
REMOTE OUT
(White/Brown)
(Orange/White)
REVERSE
Use only when back-up camera is connected.
* Connect this to the touch panel-compatible rear monitor.
01GB00IVAD106E.book Page 72 Tuesday, January 15, 2008 2:48 PM