29
-EN
Setup
DVD Setup
DVD Setup Operation
The Parking Brake must be engaged to access the DVD
mode screen. Attempting to access this screen while driving
will display the warning-CAN'T OPERATE WHILE DRIVING.
Before setup operation below, select the DVD PLAYER mode.
If a disc is inserted into this unit, make sure to take it out.
The following steps 1 to 6 are common operations to each
“Setting item” of DVD Setup. Refer to each section for
details.
1
Press
SOURCE/POWER
.
The main menu is displayed.
2
Press
6
(
SETUP
).
The Setup mode screen appears.
3
Turn the
Rotary encoder
to select “DVD,” then
press the
Rotary encoder
.
The DVD list is displayed.
4
Turn the
Rotary encoder
to select your desired
setting item.
The screen shows the
∗
Function Guide.
* Displays the function assigned for each button (the Function
buttons).
Setting items:
MENU LANGUAGE
↔
AUDIO LANGUAGE
↔
SUB
T.LANGUAGE
↔
COUNTRY CODE
↔
PARENTAL
↔
DIGITAL
OUT MODE
↔
OPT. OUT
↔
TV SCREEN
5
Press the
Function buttons
to switch the setting.
6
Press
7
(
RETURN
).
The screen returns to the previous one.
• With the DVD screen displayed, pressing and rotating the rotary
encoder will adjust the volume level.
• Immediately after inputting titles or changing the settings of DVD
mode (while the system is inputting the titles or data automatically)
do not turn the ignition key (engine key) to OFF.
Otherwise, a title may not be written, or the settings may not be
changed.
Changing the language setting
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is
convenient when you always want to listen in English. (The language
setting is not effective on some discs. If not, the default language is
set from the factory.)
• When the settings are changed, the old settings are overwritten. Make
a note of the current settings before making changes. The settings are
not cleared even when the vehicle’s battery is disconnected.
• To temporarily change the language of the current disc, either do
so from the DVD menu or by using the operation described in the
section “Switching the Audio Tracks” (page 20).
• If the disc does not include the selected language, the disc’s default
language is set.
Setting of the Menu Language
Setting item: MENU LANGUAGE
Setting contents: AUTO / ENGLISH / GERMAN/FRENCH /
JAPAN / CODE
Set the language used for the menus (title menu, etc.).
• When “AUTO” is selected, the primary menu language among the
recorded ones is played.
Setting of the Audio Language
Setting item: AUDIO LANGUAGE
Setting contents: AUTO/ ENGLISH / GERMAN / FRENCH /
JAPAN / CODE
Set the audio language produced from the speakers.
• When “AUTO” is selected, the primary audio language among the
recorded ones is played.
Setting of the Subtitle Language
Setting item: SUB T. LANGUAGE
Setting contents: AUTO / ENGLISH / GERMAN / FRENCH /
JAPAN / CODE
Set the language of the subtitles displayed on the screen.
• When “AUTO” is selected, the primary subtitle language among
the recorded ones is played.
To play in a language other than those displayed
1 Press
6
(
CODE
) of the Function buttons.
Number input box is displayed.
2 Turn the
Rotary encoder
to input the first digit of the
language number.
As for the language number, refer to “List of language
code” (page 61).
3 Press the
Rotary encoder
to enter the first digit
number.
4 Repeat steps 2 and 3 to input a 4 digit language
number, then press
6
(
ENTER
) to memorize the
number.
Rotary encoder
SOURCE/POWER
Continued
7
6
2
4
1
3
5
Summary of Contents for IVA-D900R
Page 82: ......
