37
-EN
01GB06IVAW200.fm
ALPINE IVA-W200 68-04123Z67-A (EN)
Visual EQ Setting Operation
1
Touch
[SETUP]
on the main source screen.
The SETUP selection screen is displayed.
2
Touch
[i-Personalize]
.
The i-Personalize setup screen appears.
3
Touch
[
]
of VISUAL EQ.
VISUAL EQ screen appears.
4
Select a desired setting item by touching
[
]
or
[
]
.
Setting items:
VISUAL EQ
*
BRIGHT
COLOR
*
TINT
*
CONTRAST
SHARP
*
USER
MEMORY
*
* The setting is available in the visual source mode. (except navigation
screen)
5
Change the setting on the selected item by touching
its
[
]
or
[
]
.
6
Touch
[RETURN]
to return to the previous screen.
Touch
[CONTROL]
to return to the main source screen that
was displayed before the setup operation was started.
You can select a mode suitable for the subject image.
Setting item: VISUAL EQ
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
•
To return to the initial setting after selecting any one of the setting
contents (NIGHT M. to CONTRAST) and adjusting a desired
brightness, picture tint, etc., set this function to OFF.
•
If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (NIGHT M. to CONTRAST),
“CUSTOM” is displayed.
Setting item: BRIGHT
Setting content: -15 ~ +15
You can adjust the brightness between MIN (–15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.
•
When any NIGHT M. to CONTRAST setting item is selected, the
brightness is automatically adjusted according to the car's interior
brightness if AUTO is set in “Setting the Brightness of the
Backlighting” (page 36).
Setting item: COLOR
Setting content: -15 ~ +15
You can adjust the color between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
•
Color adjustment can be made only in the navigation, DVD, Video
CD, AUX modes.
•
Color adjustment cannot be made if a Navigation system with the
RGB feature is connected.
i-Personalize™
VISUAL EQ™
To display the i-Personalize mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
•
For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the i-Personalize mode operation has
been released. Engaging the parking brake can reactivate the i-
Personalize mode, as long as the car's ignition has not been
turned off. It is not necessary to repeat the above procedure (1
through 3) of “To display the i-Personalize mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the i-Personalize mode screen.”
The following steps 1 to 6 are common operations to each
“Setting item” of VISUAL EQ setting. Refer to each section for
details
Selecting the VISUAL EQ Mode (Maker’s
setting)
OFF (FLAT):
Initial Setting
NIGHT M.:
Suitable for movies in which dark scenes
frequently appear.
SOFT:
Suitable for CGs and animated films.
SHARP:
Suitable for old movies where images are not
clearly shown.
CONTRAST:
Suitable for recent movies.
P-1:
Recalls the VISUAL EQ mode being stored on
preset No.P-1 from “Storing VISUAL EQ”
(page 38).
P-2:
Recalls the VISUAL EQ mode being saved on
preset No.P-2 from “Storing VISUAL EQ”
(page 38).
Adjusting Brightness
Adjusting Color of Picture
01GB00IVAW200.book Page 37 Tuesday, December 20, 2005 11:41 AM
Summary of Contents for IVA W200 - DVD Player With LCD Monitor
Page 77: ...LIMITED WARRANTY ...
