Alpine IVE-W560BT Owner'S Manual Download

Page: 27 / 96

-EN

Speciﬁcations

Monitor section

Display type:

Wide LCD colour monitor

Dimensions:

6.2 inchs

System:

TFT active matrix

Number of pixels:

1,152,000 pixels (800 × 3 (RGB) × 480)

Colour system:

PAL/NTSC/SECAM/PAL-M automatic select

Tuner section

FM
Tuning range:

87.5 – 108.0 MHz

Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency:

150 kHz

Usable sensitivity:

10 dBf

Selectivity:

70 dB at 400 kHz

Signal-to-noise ratio:

70 dB (mono)

Separation at 1 kHz:

30 dB

Frequency response:

20 – 15,000 Hz

AM
Tuning range:

531 – 1,602 kHz

Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency:

9,267 kHz or 9,258 kHz/4.5 kHz

Sensitivity:

44 μV

DVD/CD Player section

Signal-to-noise ratio:

80 dB

Frequency response:

20 – 20,000 Hz

Wow and ﬂutter:

Below measurable limit

Harmonic distortion:

0.05%

Region code:

Labeled on the bottom of the unit

USB Player section

Interface:

USB (Full-speed)

Maximum current:

1 A

Wireless Communication
Communication System:

BLUETOOTH Standard version 3.0

Output:

BLUETOOTH Standard Power Class 2 (Max. +4 dBm)

Maximum communication range:

Line of sight approx. 10 m (33 ft)*1

Frequency band:

2.4 GHz band (2.4000 – 2.4835 GHz)

Modulation method:

FHSS

Compatible BLUETOOTH Proﬁles *2:

A2DP (Advanced Audio Distribution Proﬁle) 1.2
AVRCP (Audio Video Remote Control Proﬁle) 1.4
HFP (Handsfree Proﬁle) 1.6
PBAP (Phone Book Access Proﬁle)
OPP (Object Push Proﬁle)
SPP (Serial Port Proﬁle)

*1 The actual range will vary depending on factors such as

obstacles between devices, magnetic ﬁelds around a
microwave oven, static electricity, reception sensitivity,
antenna’s performance, operating system, software
application, etc.

*2 BLUETOOTH standard proﬁles indicate the purpose of

BLUETOOTH communication between devices.

Power ampliﬁer section

Outputs:

Speaker outputs

Speaker impedance:

4 – 8 ohms

Maximum power output:

50 W × 4 (at 4 ohms)

General

Outputs:

Video output terminal (rear)
Audio output terminals (front, rear/sub switchable)
Power antenna (aerial)/Power ampliﬁer control
terminal (REM OUT)

Inputs:

Illumination control terminal
Remote controller input terminal
Antenna (aerial) input terminal
Microphone input terminal
Parking brake control terminal
Reverse input terminal
Camera input terminal
AUX audio input terminal (Front)
AUX Audio/Video input terminal (Rear)
USB port
External input terminal

Power requirements:

12 V DC car battery (negative ground (earth))

Dimensions:

Approx. 178 mm × 101.5 mm × 169 mm

Mounting dimensions:

Approx.178 mm ×100 mm ×165 mm

Mass:

Approx. 1.7 kg

Package contents:

Main unit (1)
Remote control (1): RUE-4233
Parts for installation and connections (1 set)
Microphone (1)

Design and speciﬁcations are subject to change without
notice.

Region code
The region system is used to protect software copyrights.
The region code is located on the bottom of the unit, and
only DVDs labeled with an identical region code can be
played on this unit.

DVDs labeled

can also be played.

If you try to play any other DVD, the message [Playback
prohibited by region code.] will appear on the monitor
screen. Depending on the DVD, no region code may be
labeled even though playing the DVD is prohibited by area
restrictions.

Due to continuous product improvement, speciﬁcations
and design are subject to change without notice.

The LCD panel is manufactured using an extremely high
precision manufacturing technology. Its effective pixel ratio
is over 99.99%. This means that there is a possibility that
0.01% of the pixels could be either always ON or OFF.