54
-EN
An iPhone/iPod can be connected to this unit, by using the USB
connection cable. When this unit is connected by using the cable, the
controls on the iPod are not functional.
•
Internet or telephone functions, etc., of the iPhone or iPod
touch are not controllable from the unit, but these functions
can be controlled using the iPhone or iPod touch itself.
•
If you connect an iPhone to this unit, it can be used as an
iPod. If you use iPhone as a hands-free phone, you need the
optional BLUETOOTH INTERFACE (KCE-400BT).
•
This unit does not support the iPod FULL SPEED™
connection. Therefore, even if you connect an iPhone/iPod
using the FULL SPEED™ connection cable (KCE-433iV) on
the BLUETOOTH INTERFACE (KCE-400BT), you cannot
operate the iPhone/iPod.
•
To watch the video screen of the Video file in the iPod
(iPhone, iPod touch, iPod classic, iPod with Video, Third
generation iPod nano and Fourth generation iPod nano),
using the USB connection and the Parking Brake must be
engaged.
•
For automatic transmission vehicles, place the transmission lever in
the Park position.
About iPhone/iPod models usable with this unit
•
This unit can be used with the following iPhone/iPod versions.
Correct function of earlier versions cannot be guaranteed.
iPhone 3G : Ver.2.2
iPhone : Ver.2.2
iPod touch (2nd generation) : Ver.2.2
iPod touch (1st generation) : Ver.2.2
iPod classic (80, 160 GB) : Ver.1.1.2
iPod classic (120 GB) : Ver.2.0.1
iPod with video : Ver.1.3
iPod nano (4th generation) : Ver.1.0.3
iPod nano (3rd generation) : Ver.1.1.3
iPod nano (2nd generation) : Ver.1.1.3
iPod nano (1st generation) : Ver.1.3.1
•
If the uint is used with iPod software versions of iTunes earlier
than 8.0.2, correct function and performance are not
guaranteed.
Playback
1
Press
SOURCE
to activate mode switching
screen.
2
Slide the display horizontally with your finger to
select Audio/Visual mode.
Each time you slide the display, the mode switches
circularly in the following order:
Audio/Visual
Navigation
Camera
Telephone
Multi Info
Audio/Visual
3
Slide the display vertically with your finger, or press
SOURCE
repeatedly to select iPod source.
4
Press
/ENTER
.
The iPod source is activated and the display changes to the
iPod main screen.
5
Touch
[
]
or
[
]
to select the desired song.
Return to the beginning of the current song:
Touch
[
]
.
Fast backward the current song:
Touch and hold
[
]
.
Advance to the beginning of the next song:
Touch
[
]
.
Fast forward the current song:
Touch and hold
[
]
.
6
To pause playback, touch
[
]
.
Touching
[
]
again will resume playback.
•
If a song is playing on the iPhone/iPod when it is connected to the
iXA-W404R, it will continue playing after the connection.
•
If you listen to an episode from a selected podcast or audiobook, the
episode can be changed by touching
Episode
[
]
or
[
]
.
•
An episode may have several chapters. The chapter can be changed
by pressing
[
]
or
[
]
.
•
If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
iXA-W404R. Therefore, a maximum of 250 characters is
recommended. The maximum number of characters for the head unit
is 128 (128 byte).
•
Some characters may not be correctly displayed.
•
“NO SUPPORT” is displayed when text information is not
compatible with the iXA-W404R.
iPhone/iPod
(Optional)