18
-EN
Adjusting Source Signal Levels
If the difference in volume level between the iPhone/iPod and FM radio
is too great, adjust the FM signal level as follows.
Setting item: FM Level
Setting contents: LOW / HIGH
PI Seek Setting
When the PI Seek is set to “AUTO”, the unit searches again for a station
in the PI (Programme Identification) list.
Setting item: PI Seek
Setting contents: OFF / AUTO
Receiving RDS Regional (Local) Stations
When OFF is selected, the unit automatically keeps receiving the related
local RDS station.
Setting item: RDS Regional
Setting contents: OFF / ON
Switching the Display Language of PTY (Programme
Type)
You can select one of the patterns of the display languages.
Setting item: PTY Language
Setting contents: GB / NL / F / D / I / E
Setting PTY31 (Emergency Broadcast) Reception
PTY31 (Emergency Broadcast) reception can be set to ON/OFF.
Setting item: PTY31
Setting contents: OFF / ON
•
The unit automatically gives priority to an Emergency Broadcast
whenever it begins, and interrupts the programme you are currently
listening to when PTY31 is set to on.
•
The unit will show “ALARM” in the display during PTY31 reception.
“iPod Setup” is selected on the Source setup main menu in step 3.
iPod Search Mode Setting
The unit allows you to search for the iPhone/iPod using eight different
search modes.
When the search mode is in Playlists/Artists/Albums/Podcasts/
Audiobooks, the initial setting is ON, and when the search mode is in
Genres/Composers/Songs, the initial setting is OFF.
•
This setting item is displayed only when the optional iPhone/iPod is
connected.
•
Set at least one Search Mode to ON, and all the modes should not be
set to OFF at the same time.
•
For search mode details, refer to “Searching for a desired Song”
(page 55).
Skip Style Setting
The unit is provided with a page skip/percent skip/alphabet skip
function for effective searching. When you use this function in the
search mode, you can quickly search an artist or a song, etc.
•
For Skip Style function details, refer to “Page Skip Function/Percent
Skip Function/Alphabet Skip Function” on page 55.
•
This setting is effective to the search mode of USB memory/Portable
audio player and iPhone/iPod.
Display Setup Operation
1
Press and hold
SETUP
for at least 2 seconds.
The SETUP selection screen is displayed.
2
Touch
[
]
of Display Setup.
The DISPLAY SETUP screen appears.
3
Touch
[
]
,
[
]
or
[
]
etc., of the desired item to
change its setting.
Setting items:
Visual EQ
*
1
/ Dimmer / Dimmer Low Level / Background /
Auto Background / Data Download
*
2
/ Screen Alignment /
Display
*
1
Refer to “Visual EQ” on page 25.
*
2
Refer to “Downloading the Background data” on page 26.
4
Touch
[
]
to return to the previous screen.
Touch and hold
[
]
for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
•
Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: Dimmer
Setting contents: OFF / ON / AUTO
•
When ON or AUTO is set, the setting is also applied for the button
lighting in “Adjusting the Dimmer of Button Lighting at Night”
(page 21).
iPod Setup
ON / OFF
PAGE / ALPHABET / PERCENT
Display Setup
The Parking Brake must be engaged to access the Display mode
screen. Attempting to access this screen while driving will display
the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 4 are common operations to each
“Setting item” of Display Setup. Refer to each section for
details.
Setting the Brightness of the Backlighting
OFF:
Deactivates Auto Dimmer mode to keep the
background illumination of the monitor bright.
ON:
Keeps the background illumination of the monitor dark.
AUTO:
Adjusts the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
