23
-EN
Setting item: AUX IN
Setting contents: OFF / ON
•
OFF is not displayed when the optional DVD player or DVD changer
is connected. During System setup, although the AUX name can be
changed, it is not displayed on the Audio/Visual source selection
screen.
•
When OFF is selected, the settings related to AUX cannot be changed
from this unit.
Adjusting the AUX name Mode
After setting to ON in “Setting the AUX Mode”, this setting can be
carried out.
Setting items: Primary / Secondary
*
1
Setting contents: OFF
*
2
/ AUX
*
3
/ DVD / GAME / TV / DVB-T /
EXT.DVD / NAV. / DVD CHG / USB Video
*
1
When a USB Video box or TUE-T200DVB (both are sold separately
and cannot be connected at the same time) is connected, you can use
it to connect one more External Input device. Setting the Secondary
name can change the source name display of this device.
*
2
The setting is only available for Secondary.
*
3
The setting is only available for Primary.
•
The selected source name is displayed instead of AUX source name.
•
You can set Secondary name only when Primary name is set to
DVB-T (or USB Video). And you cannot set the same name as in
Primary name.
•
Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
Adjusting the External Input Audio Level
After setting to ON in “Setting the AUX Mode”, this setting can be
carried out.
Setting item: Level
Setting contents: LOW / HIGH
Switching the Visual Input Signal System
After setting to ON in “Setting the AUX Mode”, this setting can be
carried out.
Setting item: Signal
Setting contents: NTSC/PAL / AUTO
•
The video input type can be changed.
•
When set to AUTO, unstable display may occur while playing back
certain black and white video signal. In this case, select NTSC or
PAL mode manually.
Outputs the picture of the source selected on the iXA-W404R connected
to the rear monitor.
Setting item: AUX OUT
Setting contents: OFF / ON
Setting item: Bluetooth IN
Setting contents: OFF / ADAPTER / NAV.
•
When this unit is connected to the optional BLUETOOTH
INTERFACE (KCE-400BT), Bluetooth IN is not set to NAV.
•
For details on Bluetooth operation, refer to the Owner’s Manual of
the BLUETOOTH INTERFACE (KCE-400BT).
•
If the mobile phone compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
If a USB Adapter is to be used, set to ON.
Setting item: USB Adapter
Setting contents: OFF / ON
•
If ON is set even when a CD changer is connected, the source name
on the Audio/Visual source selection screen will change from CD
CHG. to USB.
Setting the AUX Mode
OFF:
AUX source is not displayed.
ON:
AUX source is displayed.
LOW:
Decreases the external input audio level.
HIGH:
Increases the external input audio level.
NTSC/PAL:
Choose the video input signal type manually.
AUTO:
The suitable video input signal type will be
automatically chosen between NTSC and PAL.
Setting the Picture Output
OFF:
The “RSE” item is not displayed on the mode switching
screen.
ON:
The “RSE” item is displayed on the mode switching
screen.
Touch [
RSE
] to change to the REAR selection screen,
and then touch the desired source. The selected source
picture is output on the rear monitor.
Setting the Bluetooth Connection
(Bluetooth IN)
OFF:
Select to ignore any external interrupts.
ADAPTER:
Select when the optional BLUETOOTH INTERFACE
(KCE-400BT) is connected.
The Telephone screen of the Bluetooth is displayed.
When an external interruption occurs, the display
changes to the Telephone screen.
NAV.:
Select when the optional portable navigation is
connected.
The Telephone screen of the portable navigation is
displayed.
Setting the USB Adapter to ON/OFF
OFF:
Does not display the USB source name on the
Audio/Visual source selection screen.
ON:
Displays the USB source name on the Audio/Visual
source selection screen.
