41
-EN
When the optional BLUETOOTH INTERFACE (KCE-400BT) is
connected to this unit, the following operation can be performed.
Setup Before Using
Bluetooth is a wireless technology allowing communication between a
mobile device or personal computer over short distances. This enables a
hands-free call or data transmission between Bluetooth compatible
devices. Bluetooth transmission is available in the unlicensed 2.4 GHz
spectrum if the distance between devices is within 10 meters. For
details, refer to the Bluetooth Homepage (http://www.bluetooth.com/).
•
Depending on the Bluetooth version, a Bluetooth compatible device
may not be able to communicate with this unit.
•
Proper function of this unit with all Bluetooth compatible devices is
not guaranteed. For handling of the BT compatible device, consult
your ALPINE dealer or ALPINE website.
•
Depending on the surroundings, Bluetooth wireless connection may
be unstable.
•
When you place a call, or perform setup operations, be sure to stop
your car in a safe place.
•
Depending on the connected Bluetooth compatible device(s), the
function may differ. Also refer to the Owner’s Manual of the
connected device(s).
Before using the hands-free phone/audio function, the following
settings need to be made.
Set “Bluetooth IN” to ADAPTER (page 23).
•
Before using a hands-free phone, it must be paired with this unit.
Refer to “Bluetooth Setup” (pages 41-43).
For details on the control from a Bluetooth compatible device, refer to
the Owner’s Manual of the Bluetooth compatible device.
1
Set a Bluetooth connection from a Bluetooth
compatible device.
2
The PIN code (“0000”) is displayed on the unit.
3
Input the PIN code (“0000”) in a Bluetooth
compatible device.
4
If this unit is successfully connected to a Bluetooth
compatible device, “CONNECTED” is displayed, and
then the unit returns to normal mode.
•
Set “Setting the Search Mode” (page 42) to Visible Mode ON to
enable this unit to recognise a mobile phone. For mobile phone
passkey (passcode) input operation, refer to the mobile’s Owner’s
Manual. Additionally, the mobile phone can be searched directly
from this unit. Refer to “Registering the Bluetooth Device”
(page 42).
•
The mobile phone can be searched directly from this unit, refer to
“Registering the Bluetooth Device” (page 42).
•
If a Bluetooth compatible device is successfully connected, the next
time when the ignition key of the car is turned to on, the unit will
automatically connect to the previously connected device. However,
the connection may fail. If the auto connection fails, try the
connection manually.
Bluetooth Setup
The following steps 1 to 3 are common to the various Bluetooth
functions. For details, refer to each individual function.
•
While calling, or in the Bluetooth Audio source, Bluetooth Setup
operation cannot be performed.
•
Set “Bluetooth IN” to ADAPTER (page 23), and then perform
Bluetooth Setup operation.
1
After steps 1 and 2 in “Source Setup Operation”
(page 17) have been performed, touch
[
]
of
Bluetooth Setup.
The BLUETOOTH SETUP screen appears.
2
Touch
[
]
,
[
]
or
[
]
of the desired item to
change its setting.
Setting items:
Paired Device / Device Search / Clear Device /
Service Provider / Visible Mode / Auto Answer / Speaker Sel /
Mic Input / Firmware Version / Firmware Update
3
Touch
[
]
on the left side of screen to return to the
previous screen.
Touch and hold
[
]
on the left side of screen for at least 2
seconds to return to the main source screen that was
displayed before the setup operation was started.
BLUETOOTH
Operation
(Optional)
About Bluetooth
Before Using Hands-Free Function
How to connect to a Bluetooth compatible
device (Pairing)
Bluetooth Setup Operation
