background image

2

PRECAUTIONS

 

GUIDE FOR INSTALLATION AND CONNECTIONS

FOR AUTHORIZED ALPINE DEALERS

• Please read this GUIDE FOR INSTALLATION

AND CONNECTIONS FOR AUTHORIZED

ALPINE DEALERS and the OWNER’S MANUAL

thoroughly to familiarize yourself with each control

and function. We at ALPINE hope that your new

NVE-N852A will give you many years of enjoy-

ment.

In case of problems when installing your unit, please

contact your authorized ALPINE dealer.

Points to Observe for Safe Usage

• For safe operation of this system, please read this

manual carefully. We cannot be responsible for

problems resulting from failure to observe the

instructions in this manual.

• Pictorial displays are used to point out safety tips

to prevent harm to yourself or others and property

damage. Here is what these pictorial displays

mean. Knowing them is important to understanding

this manual.

• Meaning of displays

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE

GROUND.

(Check with your dealer if you are not sure.) Failure

to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE

FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury

due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTAN-

GLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the

manual to prevent obstructions when driving. Cables

or wiring that obstruct or hang up on places such as

the steering wheel, gear lever, brake pedals, etc. can

be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to

other equipment. Doing so will exceed the current

carrying capacity of the wire and result in fire or

electric shock.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT

HINDER VEHICLE OPERATION, SUCH AS THE

STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper

movement etc. and results in serious accident.

DO NOT DAMAGE PIPE OR WIRING WHEN

DRILLING HOLES.

When drilling holes in the chassis for installation, take

precautions so as not to contact, damage or obstruct

pipes, fuel lines, tanks or electrical wiring. Failure to

take such precautions may result in fire.

DO NOT ALTER HARDWARE USED IN ANY

SAFETY-RELATED SYSTEMS DURING INSTAL-

LATION

Never use hardware, utilized to mount critical

components in the steering and brake systems or

fuel tanks, to make wiring or ground connections.

Failure to take such precautions can result in serious

damage from fire or vehicle failure.

Warning

Warning

Caution

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric

shock.

KEEP SMALL OBJECTS SUCH AS BATTERIES

OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If

swallowed, consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN

REPLACING FUSES.

Failure to do so may result in fire or electric shock.

This symbol precedes important
instructions. Failure to heed them
can result in injury or property
damages.

This symbol will precede important
instructions. Failure to heed them
can result in serious injury or death.

Summary of Contents for NVE-N852A
















Reviews: