Alpine TEC102, Owner'S Manual

4. 

Place the Halogen Light Holder on top of the tube. 
Insert the cord inside the hollow tube all the way 
down below and place the halogen light securely 
on the Halogen Light Holder.  

5. 

Place the Submersible Pump beside the black 
tube and insert the transparent tube. Then place 
securely the Light Cover to protect the wirings and 
the Halogen Light from splashing.  

6. 

Place the Top Tier properly on top of the Light 
Cover and insert the transparent tube through the 
center hole of Top Tier. 

7. 

 Place the bronze Pump Tube on top of the Top 
Tier while inserting the transparent tube through 
the bronze Pump Tube hole. 

8. 

Gently pour water into the fountain basin, being 
careful not to overflow and cause splashing. Make 
sure the water completely submerges the pump 
and the water runs clear during operation.  

NOTE:

We recommend that you use distilled water 

to prevent scale build-up.  The first time you operate the 
pump it can take up to 5 minutes for the air to be completely 
expelled and water begins to flow properly

.  

7 

6