31
Setting
Setting
You can set this device flexibly based on your preference and purpose. In the general setting menu, you can
change the general settings, display settings and so on.
Use steps 1 to 5 to choose any setting mode to change the setting. For a detailed description of the selected
setting items, please refer to the applicable sections below.
1 Press and hold the knob for at least 2 seconds to enter the settings interface.
2 Turn the knob to select the desired item and then press the knob.
Preset Equalizer ↔ Sound Effect Setting ↔ Sound Effect Clear Setting ↔ General ↔ Bluetooth
3 Turn the knob to select General, and then press the knob.
Auxiliary audio sourc
e ↔ Language setting ↔ Dimmer control ↔ About ↔ Alpine system matching ↔
Steering wheel control learning ↔ Built
-
in power amplifier ↔ Coax/Fiber ↔ Restore factory settings
4 Turn the knob to change the setting and then press the knob.
5 Press
to deactivate setting mode.
6 In the setting interface, press and hold for a while, press and hold the knob for a while, and press and hold
for more than 2 seconds to recall the electrical test mode.
Firmware update ↔ Dealer setting ↔ Serial number
Note:
Press to go back to the previous setting mode.
General setting
Select “General” in the setting main menu.
Auxiliary sound source
You can choose the auxiliary audio source as needed. Primary source attenuation is used to set the amount of
attenuation needed for the primary source when mixed sources are input.
Setting item:
Auxiliary sound source
Setting contents:
Auxiliary audio source options: Bluetooth ↔ High level ↔ AUX ↔ Off
Primary source attenuation: 0, 30%, 50% (initial setting), 80%, 100%
Language setting
You can choose the interface display in Chinese or English based on your personal preference.
Setting item:
Language setting
Setting contents:
Simplified Chinese (initial setting)/English
Knob
