38
Performance parameters
Dynamic range
≥110dB
Signal to noise ratio
AUX≥100dB
Background noise
High level≤
-
75dBu; AUX≤
-95dBu
Channel resolution
≥80dB
THD
≤0.01%
Input voltage
High level: 26Vpp; AUX: 8Vpp
Output voltage
12Vpp
Rated power
4CH×25W(4
Ω
,
14.4V,1kHz,10%THD)
Maximum power
4CH×50W(4
Ω
,14.4V,1kHz,10%THD)
Input / output sensitivity
AUX≥1:1.5
Frequency response
20Hz~40kHz
Input impedance
High level: 51Ω; AUX: 20
K
Ω
Output impedance
51Ω
Quiescent current
≤3mA (in off state)
Stand-by power consumption
≤0.1W
REM startup input
ACC or high level (FL-/FL+)
REM startup output
12V (0.2A)
Uptime
18s
Operating ambient temperature
-20~60°C
Storage temperature
-40~85°C
Hazardous substances
Name and content of hazardous substances in the product
Component
Hazardous substance or element
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr(VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Circuit board
assembly
Housing
assembly
Display
assembly
Accessory
This table is prepared in accordance with the requirements of SJ/T 11364.
: indicates that the content of this hazardous substance in this component is below the limit specified by GB/T
26572.
: indicates that the content of this hazardous substance in at least a homogeneous material of this component exceeds
the limit specified by GB/T 26572.
For components marked with “
”, the content exceeding the limit is because there is currently no mature alternative
technology in the industry at present.