background image

English

E-2

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUT-
SIDE NOISE WHILE DRIVING

Failure to do so may result in an accident.

Caution

Installation Precautions

HAVE THE WIRING AND INSTALLATION DONE BY EXPERT

The wiring and installation of this unit requires special technical skill and
experience. To ensure safety, always contact the dealer where you purchased
this unit to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY

Be sure to use only the specified accessory parts. Use of other than desig-
nated parts may damage this unit internally or may not securely install the
unit in place causing parts to become loose resulting in hazards or product
failure.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST

Avoid installing the unit in locations with high incidence of moisture or dust.
Moisture or dust that penetrates into this unit may result in product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED

Route the cables and wiring so as not be crimped by moving parts like the
seat rail or make contact with sharp or pointed edges which might damage
the wiring.

Important Safety Tips

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS

This product is for car use only. Other uses may result in electric shock,
injury or product failure.

HALT USE IMMEDIATELY IF A PROBLEM OCCURS

Failure to do so may cause injury or damages to the product. Return it to
your authorized Alpine dealer or the nearest Alpine Service Station for re-
pairing.

Features

4 Head Hi-Fi Stereo Mobile Video Cassette Recorder.

Cassette door with a protection shutter.

Vibration proof design/high reliability, and can be used in either a vertical
or horizontal position.

Accessories

Confirm that the following accessories are included.

Mounting kit

• Bracket (2 pcs.)
• Velcro (2 pairs)
• Screw kit

(M5 

 8.......4 pcs.)

(M5 

 15.....4 pcs.)

DC power cable

AV cable

Remote control unit

Battery

External Remote Eye (including Velcro)

Remote Control Input Wire

Note

Do not leave the Remote Control on the dashboard or seat where exposed to
direct sunlight and becomes extremely hot. Be sure to keep it in the glove box
when it is not in use.

Video Cassette Tape

Only video cassette tapes marked with 

 can be used in this VCR.

Notes

• When bringing a tape suddenly from the cold outdoors into the warm tem-

perature inside the car, moisture may occur on the tape. Wait for several hours
until the tape is adjusted to the car temperature before using it as it may
cause damage.

• Do not leave a tape in the place such as on the dashboard or by the rear

window which is exposed to the direct sunlight and becomes extremely hot.

 VPE-V180A_English

4/25/00, 2:02 PM

2

Summary of Contents for V180A - VPE - VCR
































Reviews: