background image

English

E-6

Basic Operations

Playing a tape

1.

Open the protection shutter.

2.

Insert the tape into the cassette compart-
ment with the label side facing up.

When the tape has been loaded, close the pro-
tection shutter.
The unit turns on and starts playing automati-
cally if you insert a tape with its safety tab re-
moved. 

(Auto Power On/Auto Play)

3.

Press 

 (PLAY).

At the end of the tape, it will rewind and then
turn off automatically. 

(

Auto Rewind)

4.

To stop playback, press   (STOP).

5.

To eject the tape, open the protection shut-
ter, then press   (EJECT).

Playing/searching at various speeds

To

Operation

Search forward

Press 

 (FF) during playback

Search backward

Press 

 (REW) during playback

Fast-forward

Press 

 (FF) during stop

Rewind

Press 

 (REW) during stop

Slow motion

Press 

 (SLOW) during playback.

Stop

Press   (STOP)

Tips

• To resume normal playback, press 

 

(PLAY)

.

• During Fast-forward/Rewind, press 

 

(FF)/

(REW)

 to change to search.

• During search, press 

 

(FF)/

 

(REW)

 to

change to Fast-forward/Rewind.

• Each press of 

 

(SLOW)

 in the slow playback

mode changes the slow speed by 2 steps.

To

Operation

Still picture

Press   (PAUSE)
Press again to resume playback

Frame advance

Press 

 (PLAY) during still picture.

Hold the button down to play one frame
each second. Press 

 (PAUSE) to

resume playback

Notes

• Do not insert hands or foreign objects in the cas-

sette compartment. Be particularly careful when
infants are present.

• When the tape has been removed, close the pro-

tection shutter.

• If still picture and Slow playback mode continues

for 5 minutes or longer, this unit will automati-
cally switch to playback mode to protect the tape
and video heads.

Eject button

Protection shutter

Adjusting the picture

Adjusting the tracking

Although the unit automatically adjusts the track-
ing when playing a tape and 

 blinks on the moni-

tor screen, distortion may occur if the tape was
recorded poorly. If so, manually adjust the track-
ing.

During Playback

• Press 

  TRACKING/SELECT 

  

 until the best

picture is obtained.
If you can not get a clear picture with manual
tracking, press 

 

(PLAY)

 for 2 seconds to re-

turn to auto tracking.

During Slow playback

• Press 

  TRACKING/SELECT 

  

to move the

noise bars up and down.

During Still picture

• Press 

  TRACKING/SELECT 

   

during still

picture to eliminate picture shake.

Note

The noise on the screen may not be completely re-
moved depending on the tape used, especially when
the tape has been recorded on another VCR.

 VPE-V180A_English

4/25/00, 2:02 PM

6

Summary of Contents for V180A - VPE - VCR
































Reviews: