96
Use this switch to enable or disable the TMC receiver
that can receive real-time traffic information. The rest
of the buttons below are all related to the TMC
function and are available only if the receiver is
enabled.
This setting determines how your software uses the
received real-time traffic information in route
calculation. When calculating a new route, or when
recalculation becomes necessary based on the
received Traffic events, your software avoids traffic
events if it makes sense.
You can also set the minimum delay that triggers
route recalculation, and you can instruct the
application if you want to confirm every recalculation.
Tap this button to open the list of traffic event types,
and select which events to take into account in route
calculation.
5.3.4 Route settings
These settings determine how routes will be calculated.
Button
Description
You can set the type of vehicle you will use to
navigate the route. Based upon this setting, some of
the road types can be excluded from the route, or
some of the restrictions may not be taken into account
in route calculation.
You can edit the parameters of the selected vehicle
profile, or you can even create new vehicle profiles if
you tap More.
On-road navigation creates a turn by turn itinerary
using the road network on the map. Switch to off-road
navigation to navigate between destinations in a
straight line.
The route calculation can be optimised for different
situations and vehicle types by changing the planning
method. See below for details.
Alpine_X009E_B5.pdf 96
5/9/2014 14:22:26
