background image

 

 

14 

14.6.3 Cancelling sensor (wireless room temperature sensor/transmitter) 

Press the “Cancel sensor” button. Within 15 seconds, the training button on the sensor (001, 002, 003 or 004 function types) 
now has to be pressed and/or the cancel function (020 function type) has to be started. Alternatively, you can select the 
desired sensor on the configuration interface of the b@home gate and thereby cancel off. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

If sensors are cancelled, note that if there are no longer any transmitters trained with the 001, 002, 003 or 020 
function type, a trained actuator will shift to emergency mode. More information about emergency mode can be 
found in the respective actuator operating instructions. 
 
More information about the training button and/or triggering the cancel function on the sensor can be found in the 
relevant operating instructions. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Gate 

 

App 

 

Training button on sensors  
FTRFB-280.119 
FTRFB-280.120 
with housing closed. 

The cancel function can be selected on the 
FTRCUd-210.021 b@home control unit in 
the settings menu and started by pressing 
the button under .

OK

.

 

 

Training button on sensors  
FTRFB-280.101 
FTRFB-280.119 
FTRFB-280.120 
with housing open. 

Transmit log-on 

telegram? 

Exit 

OK 

Summary of Contents for B@home System


























Reviews: