4
2. Components of the b@home system
An overview of the b@home components which can be controlled remotely
The b@home system can be used to remotely control all heating and cooling systems: electric systems, such as electric
underfloor heating, infrared heating or mobile heaters as well as water-based systems, such as hot water-based underfloor
heating, radiators or cooling ceilings.
Type:
MGCBB-064.360
Function:
wireless room temperature
management system, interface between alre
wireless system and WLAN/LAN router, surface
mounting, network cable for connecting to
router and wall power supply are included in the
scope of delivery
The b@home app: free for iOS
and Android available
b@home gate
Type:
various variants (Fig. FTRCUd 210.021#21)
Function:
sensor for recording and setting the room temperature and control unit for other active channels,
any modifications undertaken are displayed with the b@home app or b@home portal, flush mounting, 230
V~, works with all common switch ranges as available in various variants (50 x 50 mm, 55 x 55 mm, pure
white, traffic white, pearl white, matt, gloss)
b@home control unit
Type:
FTRFB-280.101
Function:
sensor for recording room
temperature, very flat surface mounting,
batteries included in the scope of delivery
Type:
FTRFB-280.119
Function:
sensor for recording and setting
room temperature, very flat surface
mounting, batteries included in the scope
of delivery
Sensors (also transmitters and/or wireless room temperature sensors)
Type:
various variants (Fig. HTFRL-214.140)
Function:
multi-channel wireless
temperature controller (heating) for fitting in
heating circuit distributor, 4 or 8 channels,
includes pump module, IP 20 or IP 65, 230
V~
Type:
various variants (Fig. KTFRL-315.125)
Function:
multi-channel wireless climate
controller (heating/cooling) for fitting in
heating circuit distributor, 4 or 8 channels,
includes pump module,IP 20 or IP 65, 230
V~
Type:
HTFMA-180.161
Function:
1-channel wireless temperature
controller for heater valves, M30 x 1.5
connection, adapter for Danfoss RA, RAV,
RAVL and batteries included in the scope of
delivery
Type:
HTFRB-010.101
Function:
1-channel wireless temperature
controller, surface mounting, 3000 W
switching power (e.g. electric heaters), 230
V~
Type:
HTFRU-010.101
Function:
1-channel wireless temperature
controller for e.g. natural stone heating,
flush mounting, 230 V~
Type:
HTFRU-110.124
Function:
1-channel wireless temperature
controller for flush mounting in junction box,
optional external sensor for underfloor
temperature control or underfloor
temperature monitoring, 230 V~
Type:
HTFRA-010.101
Function:
1-channel wireless temperature
controller with Schuko plug adapter for
mobile heaters, 3000 W switching power
(e.g. electric heaters), 230 V~
Actuators (also receivers and/or wireless temperature controllers)
