CARE AND MAINTENANCE
•
Regular cleaning of the pump may be
necessary depending upon the
environment in which it is operated. Clean
the pump when it is visibly soiled or when
a drop in performance is detected.
•
Before cleaning, always disconnect the
pump from the power source.
•
Remove all parts from the pump and
clean in warm, soapy water.
•
Disassemble the pump housing and
remove the impeller housing to expose
the impeller assembly. Remove the
impeller assembly by gently pulling on the
impeller blades. Use a soft cloth or brush
to clean the impeller assembly and the
inside of the impeller housing.
TROUBLESHOOTING
If the pump fails to operate:
•
Check to make sure the power cord is
plugged in and the pump is getting
power.
•
Check the pump outlet and any
tubing, fountains, spitters etc. for
kinks or obstructions.
•
Remove the inlet screen and/or pump
cover, and impeller housing to expose
the impeller. Turn the impeller to
ensure that it is not broken or
jammed.
If the performance of the pump is not
satisfactory or the pump does not flow evenly:
•
Check to make sure the pump is
completely submerged in water.
•
Check to make sure the impeller and
the housing are clean.
•
Adjust flow control.
REPLACEMENT PARTS LIST
Part Description
A
Pump (not shown)
B Screen
C Impeller
housing
D O-ring
E Adapter
For replacement parts, contact our customer
service department at
909-424-0221.
8 am – 4:30 pm PST, Monday through Friday.
Submersible
Fountain Pump
2000 Gallons per Hour
model
ADP
ADP-50
PACKAGE
CONTENTS
Part ADP
Description Pump
Quantity 1
Questions, problems, missing parts?
Before returning to your retailer, contact our
customer service department at
909 424-0221
8 am – 4:30 pm, PST, Monday - Friday, or
e-mail us at info@alsgardenart.com
AL’S GARDEN ART
Manufacturers of cast stone fountains and
statuary since 1949, family owned and
operated with more then half a century of
skill and passion for creating top quality cast
stone art.
D
C
E
B
P.O. Box 111
•
Colton, CA 92324
www.alsgardenart.com
