1. Short press “ ” to start the machine. If not performing any operation after starting the machine, it will
automatically switch off after 30 seconds for the energy conservation and environment protection.
2. Design of Hall Switch. If the screen displays “ ” , it indicates the disinfection case is closed; If the screen
displays , it indicates the disinfection case is not closed.
3. Short press “ ” to switch the disinfection mode: ultraviolet disinfection mode (screen will display “ ” ),
ozone disinfection mode (screen will display “ ” ).
4. After selecting the disinfection mode, it is able to adjust the disinfection time by short pressing “+” or “-”
button (screen will display the time):
·
Under the ultraviolet disinfection mode, it is able to set up the disinfection time from 1 minute to 60 minutes;
Adjust the time by short pressing “+” or “-” button (It is able to accelerate the adjustment by long pressing for
1.5 seconds)
·
Under the ozone disinfection mode, it is able to set up the disinfection time from 30 minute to 180 minutes;
Adjust the time by short pressing “+” or “-” button (It is able to accelerate the adjustment by long pressing for
1.5 seconds)
5. After adjusting the disinfection time, it is able to activate the disinfection work by long pressing “ ” for
1.5 seconds, and “ ” on the screen will flash. If not long pressing “ ” , it will automatically switch off
after 30 seconds for energy conservation and environment protection.
·
Under the ultraviolet disinfection mode, the white “ ” will change to purple “ ”
·
Under the ozone disinfection mode, the white “ ” will change to blue “ ”
6. If the disinfection case is open during the disinfection, and the screen will display “ ” , “ ” will
disappear and the time will return to the preset time.
7. Long press “ ” during the disinfection to switch off the machine.
8. Short press “ ” , “+” button and “-” button during the disinfection will not be effective.
9. It will automatically stop the ozone work in the last 5 minutes of preset time in the course of ozone
disinfection, and activate the ultraviolet automatically to perform the 5-minute ozonolysis.
10. If “ ” on the screen disappears and the time displays the green number 0, it indicates the disinfection
work is completed.
11. If the battery level is lower than 20% and the battery level displays in red “ ” , it is required to charge
as soon as possible to avoid that the remaining battery power is insufficient to finish one complete
disinfection.
12. After the disinfection work is completed, it will automatically switch off after 30 seconds if not performing
any operation for the energy conservation and environment protection.
13. The disinfection case has the memory function: After starting the machine each time, the screen will display
the mode and time of disinfection work for the last time.
UVC
Operation Instruction:
