Maintenance
Maintenance plan
G51--001EN07
2/18
02--2011
© ALSTOM 2010. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is
strictly prohibited.
GRID
Maintenance plan of circuit --breaker
(20000 guaranteed mechanical cycles)
Maintenance
frequency
Under normal operating conditions, the maintenance plan of circuit--breaker
may be defined as follows :
Type of
examination
Frequency
Comment
Maintenance
visits
Once or twice a year
It is advisable to perform at
least 2 CO duty cycles per
year, when apparatus are
scarcely used, in order to
check that the circuit---
breaker and associated
control circuits are work-
ing properly.
Inspections
Every five years
This necessitates circuit---
breaker shutdown. It is not
necessary, however to dis-
mantle interrupting chambers
and other sub--assemblies.
Overhaul
Perform when one of the fol-
lowing criteria is reached :
D
operating time
≥
20 years
D
electric wear
D
Service life for the motor---
driven fans (if applicable)
≥
25,000 hours/fan
However, it is recommended
to proceed with inspection of
the pole or circuit--breaker
used the most, then to adapt
the maintenance programme
for
the
other
breakers
depending on the results
observed.
Summary of Contents for FKG1X
