Maintenance
Maintenance plan
G51--001EN07
3/18
02--2011
© ALSTOM 2010. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is
strictly prohibited.
GRID
Maintenance plan of disconnector
(if applicable)
(10000 guaranteed mechanical cycles)
Maintenance
frequency
Under normal operating conditions, the maintenance plan of disconnector
may be defined as follows :
Type of
examination
Frequency
Comment
Maintenance
visits
Once or twice a year
It is advisable to perform at
least 2 CO duty cycles per
year, when apparatus are
scarcely used, in order to
check that the disconnec-
tor and associated control
circuits are working prop-
erly.
Inspections
Every five years
This necessitates disconnec-
tor shutdown.
Overhaul
Perform when one of the fol-
lowing criteria is reached :
D
operating time
≥
20 years
However, it is recommended
to proceed with inspection of
the pole or disconnector used
the most, then to adapt the
maintenance programme for
the other apparatus depend-
ing on the results observed.
Summary of Contents for FKG1X
