Description and operation
General Description of the Circuit breaker
G12--001EN10
5/12
02--2011
© ALSTOM 2010. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is
strictly prohibited.
GRID
Chassis
Illustration
11
10
9
10a
version with MALT 160kA
12
30
Components
The following table lists the principle components of the chassis:
Mark
Component
Function
9
Support beams – fitted with
feet
Supports the pole sheathes
10--10a Supplementary support
Supports the pole sheathes
11
Strengthening
cross
member
Supports the pole sheathes
12
Control mounting chassis
Supports the various operating con-
trols
30
SF
6
pipe work and filling
unit
Provides a three--poleSF
6
connection
NOTE
:
*
Distance between phases :
<1500 = supports beam fitted with 2 feets
> 1500 = supports beam fitted with 3 feets
Summary of Contents for FKG1X
