background image

5

1 Safety Information

CAUTION! 
Read Instruction Manual before using this instrument.

WARNING! 
This manual cannot address all of the safety considerations 
associated with its use. It is the responsibility of the user to 
consult this manual and establish appropriate safety practices 
for use with this equipment and the individual material being 
tested.

WARNING! 
The BYK t200 IR Thermometer is designed and intended for 
the use described in this manual. Using the IR Thermometer 
for other purposes for which it was not designed may reduce 
or eliminate the protection offered by the features of the 
instrument. Serious injury may result.

WARNING! 
Ultimate disposal of this product should be handled according 
to all national laws and regulations. 

SAFETY! 
•  Use extreme caution when the laser beam is on.
•  Do not let the beam enter your eye,  
  another person’s eye or the eye of an animal.
•  Be careful not to let the beam on a reflective surface  
  strike your eye.
•  Do not aim the laser light beam at or  
  through any gas that can explode.

    

Please note the following points:
• 

Familiarize yourself with the layout and operation of the controls.

!

!

!

!

!

Summary of Contents for 0470













Reviews: