BYK-Gardner
byko-drive S
285 025 845 E 2106
13
Note that the maximum travel TOTAL is 235 mm. If you set a start point at
somewhere other than 0 the length will be reduced by the start point setting.
An example would be if you set the start point to 20 mm, the maximum draw-
down length would be 215 mm (235 - 20 = 215). Once the desired length is set,
press the
Save
icon in the lower right of the screen to return to the
Setup
screen. The
Close
icon in the lower left will exit the screen with no changes
saved.
4.2.4 Set Start Point
Adjusts the place the carriage will begin the drawdown. Press the appropriate
Up
or
Down
arrow to adjust each digit. The first press will turn the button
blue and subsequent press will increase or decrease the number. The instru-
ment may be set to start from 0 and 225 mm.
Note that the maximum travel TOTAL is 235 mm. If you set a start point at
somewhere other than 0 the length will be reduced by the start point setting.
An example would be if you set the start point to 20 mm, the maximum draw-
down length would be 215 mm (235 - 20 = 215). Once the desired start point is
set, press the
Save
icon in the lower right of the screen to return to the
Setup
screen. The
Close
icon in the lower left will exit the screen with no changes
saved.
