34
Measurement Modes
Note:
(micro-TRI-gloss
μ
only)
When STATISTICS is activated, all film thickness
values are stored in the Memory independently of
the sonde used.
In the case of an incorrect substrate or a high film
thickness, “Infi“ is written to the memory.
When the instrument is switched off, the last setting
remains active.
8.2.1Number of measurements
You can adjust the number of measurements per
sample or per block with this option, from 2 - 99.
You can find this value in the measurement display
by looking for “n=” after the forward slash. The
number of measurements (which increases by one
each time a measurement is performed) appears
before the slash.
