35
Measurement Modes
8.2.2Display
In the Statistics measurement display, you can
assign the following data freely to three columns:
Value:
Last value to be measured
Mean value:
Arithmetic mean of the sample (block).
Maximum:
Highest measurement value of the sample
Minimum:
Lowest measurement value of the sample
Range:
The difference between the maximum and minimum
value.
Std. Dev.:
The standard deviation of the sample
Difference*:
The difference between the sample and a target
value.
Pass/Fail*:
Pass is displayed if the sample value falls within the
specified limits, or Fail if it falls outside.
Off:
Turns off the display of the selected column.
*
To be able to use these functions, a standard must
be measured, created or selected. In particular, a
limit value must be defined.
